Basic Operators in Java

In this tutorial we will discuss about the Basic Operators in Java and its used. Java provides a rich set of operators to manipulate variables. We can divide all the Java operators into the following groups:
  • Arithmetic Operators
  • Relational Operators
  • Bitwise Operators
  • Logical Operators
  • Assignment Operators
  • Misc Operators
The Arithmetic Operators:

Arithmetic operators are used in mathematical expressions in the same way that they are used in algebra. The following table lists the arithmetic operators:

Assume integer variable A holds 10 and variable B holds 20 then:
OperatorDescriptionExample
+Addition - Adds values on either side of the operatorA + B will give 30
-Subtraction - Subtracts right hand operand from left hand operandA - B will give -10
*Multiplication - Multiplies values on either side of the operatorA * B will give 200
/Division - Divides left hand operand by right hand operandB / A will give 2
%Modulus - Divides left hand operand by right hand operand and returns remainderB % A will give 0
++Increment - Increase the value of operand by 1B++ gives 21
--Decrement - Decrease the value of operand by 1B-- gives 19

The Relational Operators:

There are following relational operators supported by Java language

Assume variable A holds 10 and variable B holds 20 then:
OperatorDescriptionExample
==Checks if the value of two operands are equal or not, if yes then condition becomes true.(A == B) is not true.
!=Checks if the value of two operands are equal or not, if values are not equal then condition becomes true.(A != B) is true.
>Checks if the value of left operand is greater than the value of right operand, if yes then condition becomes true.(A > B) is not true.
<Checks if the value of left operand is less than the value of right operand, if yes then condition becomes true.(A < B) is true.
>=Checks if the value of left operand is greater than or equal to the value of right operand, if yes then condition becomes true.(A >= B) is not true.
<=Checks if the value of left operand is less than or equal to the value of right operand, if yes then condition becomes true.(A <= B) is true.
The Bitwise Operators:

Java defines several bitwise operators which can be applied to the integer types, long, int, short, char, and byte.

Bitwise operator works on bits and perform bit by bit operation. Assume if a = 60; and b = 13; Now in binary format they will be as follows:

a = 0011 1100

b = 0000 1101

-----------------

a&b = 0000 1100

a|b = 0011 1101

a^b = 0011 0001

~a = 1100 0011

The following table lists the bitwise operators:

Assume integer variable A holds 60 and variable B holds 13 then:
OperatorDescriptionExample
&Binary AND Operator copies a bit to the result if it exists in both operands. (A & B) will give 12 which is 0000 1100
|Binary OR Operator copies a bit if it exists in eather operand. (A | B) will give 61 which is 0011 1101
^Binary XOR Operator copies the bit if it is set in one operand but not both. (A ^ B) will give 49 which is 0011 0001
~Binary Ones Complement Operator is unary and has the efect of 'flipping' bits. (~A ) will give -60 which is 1100 0011
<<Binary Left Shift Operator. The left operands value is moved left by the number of bits specified by the right operand. A << 2 will give 240 which is 1111 0000
>>Binary Right Shift Operator. The left operands value is moved right by the number of bits specified by the right operand. A >> 2 will give 15 which is 1111
>>>Shift right zero fill operator. The left operands value is moved right by the number of bits specified by the right operand and shifted values are filled up with zeros. A >>>2 will give 15 which is 0000 1111
The Logical Operators:

The following table lists the logical operators:

Assume boolean variables A holds true and variable B holds false then:
OperatorDescriptionExample
&&Called Logical AND operator. If both the operands are non zero then then condition becomes true.(A && B) is false.
||Called Logical OR Operator. If any of the two operands are non zero then then condition becomes true.(A || B) is true.
!Called Logical NOT Operator. Use to reverses the logical state of its operand. If a condition is true then Logical NOT operator will make false.!(A && B) is true.
The Assignment Operators:

There are following assignment operators supported by Java language:
OperatorDescriptionExample
=Simple assignment operator, Assigns values from right side operands to left side operandC = A + B will assigne value of A + B into C
+=Add AND assignment operator, It adds right operand to the left operand and assign the result to left operandC += A is equivalent to C = C + A
-=Subtract AND assignment operator, It subtracts right operand from the left operand and assign the result to left operandC -= A is equivalent to C = C - A
*=Multiply AND assignment operator, It multiplies right operand with the left operand and assign the result to left operandC *= A is equivalent to C = C * A
/=Divide AND assignment operator, It divides left operand with the right operand and assign the result to left operandC /= A is equivalent to C = C / A
%=Modulus AND assignment operator, It takes modulus using two operands and assign the result to left operandC %= A is equivalent to C = C % A
<<=Left shift AND assignment operator C <<= 2 is same as C = C << 2
>>=Right shift AND assignment operator C >>= 2 is same as C = C >> 2
&=Bitwise AND assignment operatorC &= 2 is same as C = C & 2
^=bitwise exclusive OR and assignment operatorC ^= 2 is same as C = C ^ 2
|=bitwise inclusive OR and assignment operatorC |= 2 is same as C = C | 2
Misc Operators

There are few other operators supported by Java Language.
Conditional Operator ( ? : ):

Conditional operator is also known as the ternary operator. This operator consists of three operands and is used to evaluate boolean expressions. The goal of the operator is to decide which value should be assigned to the variable. The operator is written as :
variable x = (expression) ? value if true : value if false

Following is the example:
public class Test {

   public static void main(String args[]){
      int a , b;
      a = 10;
      b = (a == 1) ? 20: 30;
      System.out.println( "Value of b is : " +  b );

      b = (a == 10) ? 20: 30;
      System.out.println( "Value of b is : " + b );
   }
}
This would produce following result:
output:
Value of b is : 30
Value of b is : 20
instanceOf Operator:

This operator is used only for object reference variables. The operator checks whether the object is of a particular type(class type or interface type). instanceOf operator is written as:
( Object reference variable ) instanceOf  (class/interface type)
If the object referred by the variable on the left side of the operator passes the IS-A check for the class/interface type on the right side then the result will be true. Following is the example:
String name = = "Dinesh";
boolean result = name instanceOf String;  
// This will return true since name is type of String
This operator will still return true if the object being compared is the assignment compatible with the type on the right. Following is one more example:
class Vehicle {}

public class Car extends Vehicle {
   public static void main(String args[]){
      Vehicle a = new Car();
      boolean result =  a instanceof Car;
      System.out.println( result);
   }
}
This would produce following result:
output:
true
Precedence of Java Operators:

Operator precedence determines the grouping of terms in an expression. This affects how an expression is evaluated. Certain operators have higher precedence than others; for example, the multiplication operator has higher precedence than the addition operator:

For example x = 7 + 3 * 2; Here x is assigned 13, not 20 because operator * has higher precedenace than + so it first get multiplied with 3*2 and then adds into 7.

Here operators with the highest precedence appear at the top of the table, those with the lowest appear at the bottom. Within an expression, higher precedenace operators will be evaluated first.

Category  Operator  Associativity 
Postfix  () [] . (dot operator) Left to right 
Unary  ++ - - ! ~ Right to left 
Multiplicative   * / %  Left to right 
Additive   + -  Left to right 
Shift   >> >>> <<   Left to right 
Relational   > >= < <=   Left to right 
Equality   == !=  Left to right 
Bitwise AND  Left to right 
Bitwise XOR  Left to right 
Bitwise OR  Left to right 
Logical AND  &&  Left to right 
Logical OR  ||  Left to right 
Conditional  ?:  Right to left 
Assignment  = += -= *= /= %= >>= <<= &= ^= |=  Right to left 
Comma  Left to right 
 


<<Previous <<   || Index ||   >>Next >>

No comments:

Post a Comment